WandShop.com by Windrush Technology. Vacuum wands, handling tools, vacuum pumps, tweezers and machines.

Complete kits according to application
A suggested kit of parts for your application is shown below. Options are listed further down the page. If you have not already done so, you will need to log in or register to view prices.

CONTACT LENSES	DIE - LARGE
DIE - SMALL	ELECTRONICS - FLAT
ELECTRONICS - MULTI-PURPOSE	ELECTRONICS - SMD
FIBRE-OPTICS	FINE WIRES
FLAT PANELS	GLASS LENSES
JEWELLERY	WATCH AND CAMERA

SMD electronics kit
For all SMD packages; ESD safe. Smaller and larger tips are available.

Kit item code	Description
C002	Conductive nylon die/small parts handling wand body, NO
26-0.3	ESD safe conductive PEEK nozzle, 0.3 mm
26-1.0	ESD safe conductive PEEK nozzle, 1.0 mm
43-2.5	ESD safe conductive silicone rubber cup, 2.5 mm
43-5.0	ESD safe conductive silicone rubber cup, 5.0 mm
851-M	Coiled ESD safe tubing, 3 mm ID, 5 mm OD, 2 metres relaxed
858	Static dissipative grounding kit for FV10/30/60 pumps
659	Horizontal desktop stand for NO wand, with vacuum shut-off
FV-30-240	Clean room vacuum pump, 300 mmHg, 2.5 l/min, 240 V, HEPA

To view prices, add or remove items click here >

OPTION 1 ESD safe Teflon wand
If ESD safety is important, check "ESD safe". The wand and tips will be chosen from suitable conductive materials. If you would prefer a Teflon wand, which comes with suitable tips of similar materials, for chemical resistance perhaps, check "Teflon wand".

OPTION 2 Press to release Press to pick up
Our press-to-release control button draws vacuum continuously until it is pressed, which may be important if the part has to be moved a long way,or has to be held for more than a few seconds.

OPTION 3 Desktop Wall mounted No stand
Your wand and its special tip should be kept safe and ready for use in our simple stand. Please indicate which type you would prefer.

OPTION 4 European (230 V) US (110 V) No pump (in-house vacuum)
The kit requires a vacuum source, and one of our clean-room compatible vacuum pumps is included. Please indicate which voltage you will be connecting to. If you have a vacuum source available in-house you may check "no pump".